1 x 20 g/30 g Low Melting Point Lead-Free Solder Wire Spool Sn99.3/cu0.7 Purity Environmental Protection Flux for Maintenance (0.8 mm, 100 g)

Description Lead-free. Tin soldering wire. Tin (Sn): 99.7%; Copper (Cu): 0.3% Diameter: 0.6mm/1.0mm Weight: 20g/30g (including roll weight) Rosin flux core cleans the surface When soldering, less splashes, less smoke, the smell is more relaxed. Good solderability, insulation resistance, no splashes and non-corrosive. Suitable for wide use in electrics, electronics and other areas. Use: 1. To achieve a good welding effect, the welded part must be weldable when in use, the surface of the welded metal should be kept clean and a suitable lead-free soldering iron head should be used. 2. After opening the soldering iron switch, wait for the soldering iron temperature to rise to the required operating temperature before welding. 3. The operator's head should be 20 cm away from the pad. 4. When the soldering iron is not used, a tin layer should be placed on the soldering iron, and then turn off the power switch. 5. The working area should be equipped with a suitable air buoyancy device. ========== Chemical of particularly concern - None Application: welding electronic products Weight: 20g/30g (including roll weight) Material: Pewter Certification: None Origin: Mainland China

• Lead free
• Tin (Sn): 99.7%; Copper (Cu): 0.3%
• Diameter: 0.6mm/1.0mm
• Weight: 20g/30g (including roll weight)
• Tin soldering wire